Introducing the new Atlas Copco compact booster.
Hurricane B7-41/1000 Compact T3 APP
Standard Scope of Supply
The Atlas Copco Hurricane B7-41 Compact is a single-stage, oil-lubricated, piston type air/nitrogen compressor, powered by a Caterpillar C7.1 diesel engine.
Compact and light, it gives you as much power as larger and heavier units on the market. It provides you with a high pressure, gain penetration rate for your drilling applications. Applications include mineral exploration and blast hole drilling, water well and geothermal drilling, oil & gas exploration drilling, nitrogen generation, pipeline services and well services.
Constructed from genuine high-quality parts, B7-41 booster offers user-friendliness, easy serviceability, and economical operation to ensure best-in-class cost of ownership.
Available model
B7-41/1000 Compact Open skid
Features
Full function digital instrument panel monitoring all pressures, temperatures and controls with full protection shutdown and fault indicators
Automatic load/unload system
On board fuel tank
Booster bypass valve
Engine speed adjustment
Two-way concentric valves
Water-cooled booster block
Low pressure switch at booster inlet
Dual inlet suction manifold
Discharge temperature sensor at each valve
Pre-cooler (a+15°F / 8°C) & suction scrubber tank
After-cooler (a+50°F / 28°C)
Open skid with single point lifting and fork lift slots
24-volt DC starting and operating system
Suction and discharge safety relief valves
Benefits
Best fit with Atlas Copco feed-air compressors
Worldwide service support
Economical in transport and installation
Longer valve life & optimal performance in high ambient conditions.
Optimal performance in humid ambient conditions
Optimal performance in low ambient conditions
Economical operation – lower fuel consumption
Adjustable capacity to match the feed-air compressors
Maintains minimum compression ratio – avoids formation of condensate
Easy to operate
Optimum safety for your equipment
High reliability
Efficiency and productivity
Our boosters further increase pressure ratio of air or nitrogen by approximately factor 2.7 and 2.9 per compression stage (up to 3 stages available). The integrated fuel tank autonomy further improves ease of use.
Versatility and profitability
Through the new Xc4004 Smart air controller, the required output pressure can easy be defined with a touch of the button. You determine the pressure, while your application dictates the flow. For example in a drilling application, drilling speed can efficiently be increased, reducing the cost per meter drilled and improving your overall profitability.
Serviceability
Our pumperblock design not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours.
Transportability
- Our in-house pumperblock design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. Even a 4.4m2 booster can boost gas up to 69 bar.
- This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer.
- With the weight as low as 2950 kg, even demanding offshore applications experience no limitations.
Safety
Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components.
Smart air controller
- A clear 7 inch screen with all key parameters at first glance.
- Access to historical data.
- Remote controlling
- With this controller, your booster is ready for the future.
Introducing the new Atlas Copco compact booster.
Hurricane B7-41/1000 Compact T3 APP
Standard Scope of Supply
The Atlas Copco Hurricane B7-41 Compact is a single-stage, oil-lubricated, piston type air/nitrogen compressor, powered by a Caterpillar C7.1 diesel engine.
Compact and light, it gives you as much power as larger and heavier units on the market. It provides you with a high pressure, gain penetration rate for your drilling applications. Applications include mineral exploration and blast hole drilling, water well and geothermal drilling, oil & gas exploration drilling, nitrogen generation, pipeline services and well services.
Constructed from genuine high-quality parts, B7-41 booster offers user-friendliness, easy serviceability, and economical operation to ensure best-in-class cost of ownership.
Available model
B7-41/1000 Compact Open skid
Features
Full function digital instrument panel monitoring all pressures, temperatures and controls with full protection shutdown and fault indicators
Automatic load/unload system
On board fuel tank
Booster bypass valve
Engine speed adjustment
Two-way concentric valves
Water-cooled booster block
Low pressure switch at booster inlet
Dual inlet suction manifold
Discharge temperature sensor at each valve
Pre-cooler (a+15°F / 8°C) & suction scrubber tank
After-cooler (a+50°F / 28°C)
Open skid with single point lifting and fork lift slots
24-volt DC starting and operating system
Suction and discharge safety relief valves
Benefits
Best fit with Atlas Copco feed-air compressors
Worldwide service support
Economical in transport and installation
Longer valve life & optimal performance in high ambient conditions.
Optimal performance in humid ambient conditions
Optimal performance in low ambient conditions
Economical operation – lower fuel consumption
Adjustable capacity to match the feed-air compressors
Maintains minimum compression ratio – avoids formation of condensate
Easy to operate
Optimum safety for your equipment
High reliability
Efficiency and productivity
Our boosters further increase pressure ratio of air or nitrogen by approximately factor 2.7 and 2.9 per compression stage (up to 3 stages available). The integrated fuel tank autonomy further improves ease of use.
Versatility and profitability
Through the new Xc4004 Smart air controller, the required output pressure can easy be defined with a touch of the button. You determine the pressure, while your application dictates the flow. For example in a drilling application, drilling speed can efficiently be increased, reducing the cost per meter drilled and improving your overall profitability.
Serviceability
Our pumperblock design not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours.
Transportability
- Our in-house pumperblock design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. Even a 4.4m2 booster can boost gas up to 69 bar.
- This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer.
- With the weight as low as 2950 kg, even demanding offshore applications experience no limitations.
Safety
Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components.
Smart air controller
- A clear 7 inch screen with all key parameters at first glance.
- Access to historical data.
- Remote controlling
- With this controller, your booster is ready for the future.