COMPANY INSIGHT

Sponsored by: ANDRITZ Separation

Improved water recovery in tailings treatment by dewatering with ANDRITZ decanter centrifuges

ANDRITZ Separation provides mechanical and thermal technologies, services and automation solutions for the chemical, environmental, food, mining and minerals industries.

Tailings treament is one of the most common safety, environmental & operational challenges in mining business. Dewatering as a method of treatment has been gaining popularity as it not only enables dry stacking, but also recovers process water and one of the most efficient technologies is the ANDRITZ decanter A10-4.

More than half of the country’s coal mines are managed by pro-Russian separatist militia.Credit: DmyTo/Shutterstock.

More than half of the country’s coal mines are managed by pro-Russian separatist militia.

Credit: DmyTo/Shutterstock.

Designed to meet all tailings treatment needs

Eliminating the need for a tailings dam. Improving process water recovery to decrease reliance on external water sources. Handling of abrasive material, high throughputs or slurries with high density. Based on the unique conditions at your site, ANDRITZ recommends and fine-tunes a solution that provides not only the highest possible process efficiency, but also state-of-the-art dewatering and recovery of process water. With an installed base of over 20,000 machines and over 70 years of experience with red mud, ANDRITZ is not only one of the leading suppliers of decanter centrifuges, but also well experienced when it comes to tailings treatment.


All of which has cumulated in one solution customized to handle all requirements for tailings– the ANDRITZ decanter centrifuge A10-4. Operating with high-speed design capabilities for dewatering of tailings and fine solids, the ANDRITZ decanter centrifuge A10-4 enables you to handle high volumes and increase recovery rates, also due to its large diameter-to-length ratio.


In addition, it is designed for maximum flexibility, with multiple construction material options and unique features such as operating speeds of up to 2,200 G (ideally suited to achieving high recovery rates for fine particles as well as high throughput) and a dual VFD drive system to react automatically to varying process parameters during operation in torque control mode. The deep pond configuration enabling reduced power consumption and a cleaning-in-place (CIP) feature for highest hygienic standards and minimized downtimes complete this innovative piece of equipment. But there is even more to this specific centrifuge.

High-speed ANDRITZ decanter centrifuge A10-4 customized for tailings dewatering

Improved decanter operation with higher capture rate

When dewatering tailing slurries, highest separation efficiency not only results in easier dry stacking of the dewatered tailings, but also in more process water being recovered with less fines entrained. This is why ANDRITZ has improved the feed ports of their decanter centrifuges with the GentleFeederTM feeding system. The system ensures that there is less turbulence in the feed zone in order to decrease shearing forces. This prevents potential particle breakage, improves flocculant efficiency, and reduces the fines content in the centrate.


The GentleFeederTM feeding system can be tailored to any application and product for which the decanter centrifuge A series is used, and it has been specially customized for tailings treatment on the ANDRITZ decanter centrifuge A10-4. The CFD-optimized design of the GentleFeederTM feeding system to reduce shear forces and smooth the injection impact has been shown to increase revenue due to the product quality achieved, containing up to only half the amount of solids previously entrained in the centrate.

The GentleFeederTM feeding system –for easy upgrade of existing decanters

Saving water, space, and energy

With improved process water recovery during tailings dewatering, no need for a tailings dam, and the machine’s smaller footprint compared to filter presses, a decanter centrifuge is already a real economizer. In the specific case of the ANDRITZ A10-4 decanter centrifuge, these features are combined with a power recovery system called the TurboJet® weir plate in order to minimize energy consumption as well. As a result of the highly efficient hydraulic design of the rotating unit, the discharge radius of the clarified liquid – the centrate – is kept to a minimum.


The TurboJet recovers the kinetic energy in the liquid and reduces overall energy consumption. Power savings thanks to TurboJet® will vary with feed flow rate, pond depth and bowl speed, usually reaching 20 to 30% (depending on operating conditions) compared to standard weir plates. An additional benefit is the lower capital cost because the size of the main motor, VFD and belt drive can be reduced when a TurboJet® weir plate is included in a new decanter.

Ready for the future of industry 4.0

One of the latest innovations by ANDRITZ, and one which is also available as an option for the ANDRITZ decanter centrifuge A10-4, is the Metris addIQ control system for decanter centrifuges – a well-proven, intelligent control solution for industrial processes and machines. The heart of the addIQ system is a modular, PLC-based control system that helps you obtain optimum benefit from your ANDRITZ decanter centrifuge.

The GentleFeederTM feeding system –for easy upgrade of existing decanters

Depending on the package chosen – ranging from replacement of existing installations with addIQ PURE to the ECO, DYNAMIC and PRIME packages and the customizable FLEX – you can chose the degree of decanter automation that will best fit your needs. The range extends from machine control alone, to line control, 24/7 monitoring options and remote support, to our analysis tool Metris addIQ Optimizing, which seeks out ways for you to save money while also stabilizing and increasing production on your equipment.

Metris addIQ Monitoring helps you to monitor your machine 24/7. It is displayed here on the ANDRITZ app for machine monitoring.

These flexible monitoring and optimizing options enable you to improve such KPIs as dryness, energy efficiency and water recovery on a continuous basis. With the Metris addIQ control systems, our ANDRITZ decanter centrifuge A10-4 is not only one of the most efficient options for tailings treatment available on the market but is also ready for the future of industry 4.0 and IIoT.

Share this article!

Go to article: Home | Canada goes criticalGo to article: In this issueGo to article: BASF Company InsightGo to article: BASF Go to article: ContentsGo to article: Normet International Company InsightGo to article: Normet InternationalGo to article: Covid-19 executive briefingGo to article: The briefing on miningGo to article: MalmedieGo to article: Bulk Mining Explosives (BME)Go to article: NewsGo to article: LiebherrGo to article: Xore Company InsightGo to article: XOREGo to article: Unleashing coal: inside India’s plans to open up commercial coal mining Go to article: Nasaco International Company InsightGo to article: Nasaco International Go to article: Hilliard Brake SystemGo to article: Eyes on the prize: inside the US and Canada’s critical minerals planGo to article: GIW Industries Company InsightGo to article: GIW IndustriesGo to article: FerritGo to article: Resurgent no more? How Covid-19 put the brakes on nickel’s great recoveryGo to article: The New York Blower Company InsightGo to article: The New York Blower CompanyGo to article: Seal SaverGo to article: How defunct coal mines could be heating UK homes Go to article: TowHaul Company InsightGo to article: TowHaulGo to article: ThermamaxGo to article: Hydrogen-powered vehicles: innovations in the future of mining machinery?Go to article: TNR Company InsightGo to article: TNRGo to article: IBM and Shell’s mission to create the Amazon of digital miningGo to article: BEDA Oxygentechnik Company InsightGo to article: BEDA OxygentechnikGo to article: ZS Zylinder-Service Company InsightGo to article: ZS Zylinder-Service Go to article: Q&A: Smart technology and the Covid-19 rebound with AxoraGo to article: Conductix-Wampfler GroupGo to article: In pictures: the USGS’s ocean mining researchGo to article: Ceramic TechnologyGo to article: Deals in brief powered by GlobalDataGo to article: The key list powered by GlobalDataGo to article: CanunGo to article: Global markets and indices powered by GlobalDataGo to article: Macro-economic indicators (1 of 2) powered by GlobalDataGo to article: Macro-economic indicators (2 of 2) powered by GlobalDataGo to article: AYMA Mining SolutionsGo to article: Industry EventsGo to article: ANDRITZ Company InsightGo to article: AndritzGo to article: GEOKONGo to article: Next issueGo to article: MaptekGo to article: Vernetzen Go to article: Aspect Environmental Company InsightGo to article: Aspect EnvironmentalGo to article: Quantum Filtration Medium Go to article: RPMGlobal Go to article: S&C Electric Company InsightGo to article: S&C Electric CompanyGo to article: MMDGo to article: MMD VideoGo to article: NETZSCH Company InsightGo to article: NETZSCH Go to article: Petrolab Company InsightGo to article: PetrolabGo to article: McElroy ManufacturingGo to article: Strata ProductsGo to article: Accutron InstrumentsGo to article: Advantage PressurePro LLCGo to article: SandvikGo to article: NSK Go to article: Miner Elastomer Products CorporationGo to article: Vietti Slurrytec