Introducing the new Atlas Copco compact booster. 
Hurricane B7-41/1000 Compact T3 APP 

Standard Scope of Supply

The Atlas Copco Hurricane B7-41 Compact is a single-stage, oil-lubricated, piston type air/nitrogen compressor, powered by a Caterpillar C7.1 diesel engine.

Compact and light, it gives you as much power as larger and heavier units on the market. It provides you with a high pressure, gain penetration rate for your drilling applications. Applications include mineral exploration and blast hole drilling, water well and geothermal drilling, oil & gas exploration drilling, nitrogen generation, pipeline services and well services.

Constructed from genuine high-quality parts, B7-41 booster offers user-friendliness, easy serviceability, and economical operation to ensure best-in-class cost of ownership.

Available model

B7-41/1000 Compact Open skid

Features

  • Full function digital instrument panel monitoring all pressures, temperatures and controls with full protection shutdown and fault indicators

  • Automatic load/unload system

  • On board fuel tank

  • Booster bypass valve

  • Engine speed adjustment

  • Two-way concentric valves

  • Water-cooled booster block

  • Low pressure switch at booster inlet

  • Dual inlet suction manifold

  • Discharge temperature sensor at each valve

  • Pre-cooler (a+15°F / 8°C) & suction scrubber tank

  • After-cooler (a+50°F / 28°C)

  • Open skid with single point lifting and fork lift slots

  • 24-volt DC starting and operating system

  • Suction and discharge safety relief valves

Benefits

  • Best fit with Atlas Copco feed-air compressors

  • Worldwide service support

  • Economical in transport and installation

  • Longer valve life & optimal performance in high ambient conditions.

  • Optimal performance in humid ambient conditions

  • Optimal performance in low ambient conditions

  • Economical operation – lower fuel consumption

  • Adjustable capacity to match the feed-air compressors

  • Maintains minimum compression ratio – avoids formation of condensate

  • Easy to operate

  • Optimum safety for your equipment

  • High reliability

Efficiency and productivity

Our boosters further increase pressure ratio of air or nitrogen by approximately factor 2.7 and 2.9 per compression stage (up to 3 stages available). The integrated fuel tank autonomy further improves ease of use.

Versatility and profitability

Through the new Xc4004 Smart air controller, the required output pressure can easy be defined with a touch of the button. You determine the pressure, while your application dictates the flow. For example in a drilling application, drilling speed can efficiently be increased, reducing the cost per meter drilled and improving your overall profitability.

Serviceability

Our pumperblock design not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours.

Transportability

  • Our in-house pumperblock design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. Even a 4.4m2 booster can boost gas up to 69 bar.
  • This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer.
  • With the weight as low as 2950 kg, even demanding offshore applications experience no limitations.

Safety

Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components. 

Smart air controller

  • A clear 7 inch screen with all key parameters at first glance.
  • Access to historical data.
  • Remote controlling
  • With this controller, your booster is ready for the future.

Introducing the new Atlas Copco compact booster. 
Hurricane B7-41/1000 Compact T3 APP 

Standard Scope of Supply

The Atlas Copco Hurricane B7-41 Compact is a single-stage, oil-lubricated, piston type air/nitrogen compressor, powered by a Caterpillar C7.1 diesel engine.

Compact and light, it gives you as much power as larger and heavier units on the market. It provides you with a high pressure, gain penetration rate for your drilling applications. Applications include mineral exploration and blast hole drilling, water well and geothermal drilling, oil & gas exploration drilling, nitrogen generation, pipeline services and well services.

Constructed from genuine high-quality parts, B7-41 booster offers user-friendliness, easy serviceability, and economical operation to ensure best-in-class cost of ownership.

Available model

B7-41/1000 Compact Open skid

Features

  • Full function digital instrument panel monitoring all pressures, temperatures and controls with full protection shutdown and fault indicators

  • Automatic load/unload system

  • On board fuel tank

  • Booster bypass valve

  • Engine speed adjustment

  • Two-way concentric valves

  • Water-cooled booster block

  • Low pressure switch at booster inlet

  • Dual inlet suction manifold

  • Discharge temperature sensor at each valve

  • Pre-cooler (a+15°F / 8°C) & suction scrubber tank

  • After-cooler (a+50°F / 28°C)

  • Open skid with single point lifting and fork lift slots

  • 24-volt DC starting and operating system

  • Suction and discharge safety relief valves

Benefits

  • Best fit with Atlas Copco feed-air compressors

  • Worldwide service support

  • Economical in transport and installation

  • Longer valve life & optimal performance in high ambient conditions.

  • Optimal performance in humid ambient conditions

  • Optimal performance in low ambient conditions

  • Economical operation – lower fuel consumption

  • Adjustable capacity to match the feed-air compressors

  • Maintains minimum compression ratio – avoids formation of condensate

  • Easy to operate

  • Optimum safety for your equipment

  • High reliability

Efficiency and productivity

Our boosters further increase pressure ratio of air or nitrogen by approximately factor 2.7 and 2.9 per compression stage (up to 3 stages available). The integrated fuel tank autonomy further improves ease of use.

Versatility and profitability

Through the new Xc4004 Smart air controller, the required output pressure can easy be defined with a touch of the button. You determine the pressure, while your application dictates the flow. For example in a drilling application, drilling speed can efficiently be increased, reducing the cost per meter drilled and improving your overall profitability.

Serviceability

Our pumperblock design not only efficient and small, it is also easy to maintain. The standard components don’t require special oils and all service points are easily accessible. A booster can be maintained by one service technician without the need for a crane or special tools within 4 hours.

Transportability

  • Our in-house pumperblock design allows for a unique set-up of all booster components, greatly impacting the footprint of the high pressure booster. Even a 4.4m2 booster can boost gas up to 69 bar.
  • This small footprint limits transportation costs as both the booster and feed air compressor can be combined on one trailer.
  • With the weight as low as 2950 kg, even demanding offshore applications experience no limitations.

Safety

Our state-of-the art Xc4004 controller is constantly monitoring all vital parameters of the booster. In case of pending failure, the controller will protect your investment by automatically shutting down and thus avoiding damage to core components. 

Smart air controller

  • A clear 7 inch screen with all key parameters at first glance.
  • Access to historical data.
  • Remote controlling
  • With this controller, your booster is ready for the future.