THE ULTIMATE INDUSTRIAL AND
UNDERGROUND LED LIGHTING SOLUTION

LINK N LIGHT INDUSTRIAL LED LIGHTING SYSTEM

The Link N Light Industrial LED Strip Light System is the most rugged, well-built Industrial Strip Light on the market. It is the only system available that is fully plug-and-play and contains the connection cables inside the light. The lights can be installed up to 240m from a power supply enclosure.

The system is used to light up underground and dark industrial environments. A Portable Light System can be used as a temporary light on work sites and shutdown areas.


LENGTH

  • Available in 1, 5 and 15mtr Lengths

VARIATIONS

  • Mining A- 2 feed through cables

  • Mining B- 1 feed through cable

COLOURS

  • 6000K White

  • Red

  • Blue   

  • Green

  • Amber

  • RYG

Link N Light Delineator

As the name suggests, Delineator is a plug-and-play LED Lighting System that is designed for roadways, hazard awareness, visual barricading, and emergency services. The system is also a cost-effective way of lighting conveyors and underground areas.


FEATURES

  • The Delineator product is a Backbone Cable, which boasts light connections at 2.5m or 5m intervals, with the lights simply plugging into these connections.

  • The Backbone Cable can be run up to 300m from any direction from a power supply enclosure, and 600m if the enclosure is centred in the middle of the run.

  • Extremely low wattage, extra low voltage, so it lends itself to solar power extremely well.

  • Delineator is rated at IP66 and is a simple and easy install.

  • Delineator can be run from mains power, solar or even vehicle power through our vehicle power supply enclosure.

  • Lights are available as white, red and amber. Other colours can be custom built.

Link N Light Delineator

As the name suggests, Delineator is a plug-and-play LED Lighting System that is designed for roadways, hazard awareness, visual barricading, and emergency services. The system is also a cost-effective way of lighting conveyors and underground areas.


FEATURES

  • The Delineator product is a Backbone Cable, which boasts light connections at 2.5m or 5m intervals, with the lights simply plugging into these connections.

  • The Backbone Cable can be run up to 300m from any direction from a power supply enclosure, and 600m if the enclosure is centred in the middle of the run.

  • Extremely low wattage, extra low voltage, so it lends itself to solar power extremely well.

  • Delineator is rated at IP66 and is a simple and easy install.

  • Delineator can be run from mains power, solar or even vehicle power through our vehicle power supply enclosure.

  • Lights are available as white, red and amber. Other colours can be custom built.

Showroom
Unit 12/ 70 Connors Road
Paget Mackay QLD 4740
P. (07) 4998 5613 P. (07) 4955 7850
E. sales@eastwestelectrical.com.au
E. admin@eastwestelectrical.com.au
www.eastwestlighting.com.au

For more information get in touch

Showroom
Unit 12/ 70 Connors Road
Paget Mackay QLD 4740
P. (07) 4998 5613 P. (07) 4955 7850
E. sales@eastwestelectrical.com.au
E. admin@eastwestelectrical.com.au
www.eastwestlighting.com.au

Power Supply Box Indust1

LED Lights are electronic equipment. Good clean power is essential for electronics. The power for LED’s is supplied from mains power comes through a LED driver. A quality led driver is a must for LED’s. It can make or break a light, lengthen or shorten its life. Using an inferior quality driver not only can damage your light but can also give inferior power output and hence light output. Meanwell LED Drivers are recognised as the industry standard in LED lighting drivers. This is the driver that East West Lighting use and recommend.


The voltage input can be supplied by 110V-415VAC depending on customer requirements. The output of this box is 48VDC. This supply panel must be connected by a licensed electrician or a lead can be fitted to the panel.


The Power Supply Box has:

  • Circuit protection for both supply and outgoing circuits
  • Power metering to ensure that the system and LED strips are functioning correctly.
  • A lockable isolator for working on the system
  • Quick connector sockets that allow quick connection and disconnection of outgoing circuits.
  • Can be manufactured to customers’ requirements. Can be assembled from PVC, steel or 316 stainless steel.
  • Extras can include input supply healthy indicators. ELCB protection on the input supply. Mounting brackets to go on rock bolts etc. Customers’ requests are welcome

The LED Strip Light

The LED strip light is robustly built to be used in any industrial, tunneling, commercial or construction environment. The light itself contains:

  • Cabling that connects to the next light by quick connect plugs
  • Robust silicon rubber coating
  • IP66 protection rating
  • Comes in 15 metre lengths
  • Light comes with two through feed cables to connect to next light or next cable depending on your needs
  • Extras include clips for catenary or wall mounting

Quick Plug Connectors and Joiners

  • The joining system is a tried and tested plug manufactured by a reputable company. This has been tested to extremes and found it is the best suited plug and play system for a rugged and versatile system
  • Using quick plug connectors and joiners ensures that the lights can be installed quickly and safely. The joiners click together but cannot be disconnected without a tool.